| Floor Joint Sealant |
Caulking Applied Prior to Assembly between each Joint |
| Floor Type |
1-3/8" Laminated Hardwood Floor with 2 Screws per Board |
| Floor Undercoat |
Pre-Coated with Black Sealer on Bottom of Wood Floor |
| Front Corner Post |
.080" Extruded Aluminum 4-3/4" Radius Front Corner Posts |
| Front Wall Lining |
Two .016" grade 80 galvanized (G40) steel panels pre-painted white with rolled edges and 14" high galvanized steel grad 80 wearband |
| Front Wall Posts |
(4) 2" 14 Gauge High Strength 50 Steel Hat-Shaped Front Wall Posts |
| Hendrickson Air Ride Systems with Integral Axes |
Hendrickson® HKANT 40K Air Ride/Slider System |
| Hub Piloted System with Outboard Drums |
Outboard Cast Drums for 16-1/2" × 7" Brakes |
| Inside Width |
101" Inside Width at Wearband |
| Length |
53' 0" Overall Length |
| Lower Clearance Lights |
Grote® Micronova® LED PC-Rated Light |
| Main Harness |
Utility Moisture-Resistant 6-Wire Harness with Internal Ground and 7-Way Plug |
| Oil Seals |
National® 5 Star Oil Seal for 5-year Warranty |
| Overall Height |
13' 6" Overall Height on 46-1/2" 5th Height |
| Rear Case & Buckplate Material |
Satin Finish Stainless Steel Rear Door Frame and Buckplate |
| Rear Door Hinges |
4 Aluminum Rear Door Hinges per Door |
| Rear Door Lock Rods |
1 per Door |
| Rear Door Type |
1/2" Composite Rear Swing Doors |
| Rear Header Clearance Lights |
Grote Micronova LED Grommet-Mounted Rear Header Identification/Clearance |
| Rear Subframe Finish |
Rust Preventative Coating |
| Rear Treadplate |
.219" High Strength × 27" Deep Steel Rear Threshold Integral with Rear Buckplate |
| Roof Bows |
1-1/16" Anti-Snag Galvanized Steel Roof Bows 16" Center Line; (Front and Rear Subframe 24" Center Line) Bonded to Roof Skin |
| Side Panels |
Composite Panel Side Wall Design with Injected Polyurethane Foam Core; Pre-Painted White .040" Aluminum Exterior Side Wall Panels |
| Side Posts |
3/8" 14 Gauge High Strength Galvanized Hat-Shaped 24" Center Line; (Front and Rear Subframe 16" Center Line) with "A" Slots on 8" Vertical Center Line. Posts on 12" Center Line at extreme Front Panel |
| Side Wall Lining |
Pre-painted White Galvanized Steel "Anti-Snag" Side Wall Lining |
| Slider Pin Release Mechanism |
Hendrickson Quik-Draw® Air-Operated Slider Repositioning System |
| Slider Suspension Location |
70" Rear and 166" Forward Suspension Location for 96" of Slider Travel |
| Stop/Tail/Turn Light Configuration |
Grote 4" LED Stop/Tail/Turn Lights |
| Support Leg Finish |
Rust Preventative Coating |
| Wearband |
18 Gauge 12" High Corrugated Steel |
| Cross Members Legs to Rear Subframe |
4" Steel 80,000 psi I-Beam Cross members with 4 Rivet End Clips on 12" Center Line |
