| ABS Warning Light |
5" Diameter Axle |
| Conduit |
Utility Black Enamel Finish with Primer Undercoat on all Steel Show Surfaces; Aluminum Parts in Natural Finish. Black Rust Preventative Coating on Cross members, Undercarriage and Inboard Surface on Main Beams. |
| Cross Members |
3" Steel I-Beam Cross members on 12" Center Line Full Length |
| Fixed Air Ride Suspension Location |
Fixed Suspension Location at 94" Center Line to Rear |
| Floor Type |
1-1/8" Extruded Aluminum Flat Top Floor with 4 Hardwood Nail Strips |
| Front Pockets |
7 Gauge High-Tensile Steel Outside-type Front Pockets |
| Front Rail |
Carbon Steel Bolt-on Front Rail |
| Front Subframe Assembly Finish |
1/4" Steel Approach Plate |
| Hub Piloted System with Outboard Drums |
Outboard Cast Drums for 16-1/2" × 7" Brakes |
| Kingpin Type |
1/2" × 4" 80,000 psi Bottom Flange |
| Main Harness |
Utility Moisture Resistant 6-Wire Cable Harness with Internal Ground and 7-Way Plug |
| Oil Seals |
National® 5 Star Oil Seal for 5-year Warranty |
| Outriggers |
3 Steel Tube Outriggers Each Side |
| Payload Capacity |
80,000 lbs Payload Capacity |
| Pipe Spools |
Steel Pipe Spools on 24" Center Line Centered between Pockets (Meets "Trailer Cargo Anchoring Device" Requirement) |
| Rear Corners |
1/2" × 6" Steel Plate Rear Corners |
| Rear Pockets |
Steel Outside-type Rear Pockets |
| Rear Rail |
Carbon Steel Bolt-on Rear Rail |
| Rub Rail |
1/4" × 3" High-Tensile Steel Rub Rail |
| Rubber Dock Bumpers on Rear Rail |
(2) 3-1/2" Rubber Bumpers Mounted on Rear Rail |
| Side Pockets |
7 Gauge High-Tensile Steel Outside-type Side Pockets |
| Side Rail |
4-7/16" 7 Gauge High-Tensile Steel Bolt-on Side Rail |
| Spring Suspension |
Holland Binkley SP9000 Spring Suspension with 49" Axle Spacing |
| Springs |
3 Leaf Steel Springs |
| Stop/Tail/Turn Light Configuration |
Grote® 4" LED Stop/Tail/Turn Lights |
| Top Flange |
1/4" × 6-1/2" High-Tensile Steel 80,000 psi Formed Channel Top Flange |
