| ABS |
Bendix® TABS-6 2S/1M ABS System With SR-5 Spring Brake Valve |
| Cross Member Floor Fillers |
Full Length Hardwood Floor Fillers |
| Cross Members Legs to Rear Subframe |
5-1/2" Aluminum I-Beam Cross members with 4 Rivet End Clips on 12" Center Line |
| Cross Members over Rear Subframe |
4" Steel I-Beam Cross members with 4 Rivet End Clips on 12" Center Line |
| Floor Thickness |
3" Floor |
| Floor Type |
1-3/8" Heavy-Duty Extruded Aluminum Duct Floor with Integral 10" Heavy-Duty Extruded Aluminum Non-Tapered Wearband. Fork Lift Reinforcing is for a 16,000 Load on the Front Axle of the Fork Truck |
| Floor Underskin |
.040" Versitex |
| Fork Lift Reinforcing |
Bearing Grid System at Rear with Full Length Hardwood Fillers & Aluminum I-Cores Rear 36" of Floor in Center 68". 1 Additional Cross member at Rear for Maximum 6" Center Line at Rear 34" |
| Front Corner Post |
.080" Extruded Aluminum 4-3/4" Radius Front Corner Post |
| Front Corner Post Inserts |
Stainless Steel Front Corner Post Inserts |
| Front Wall Lining |
.065" Versitex |
| Front Wall Thickness |
4" Front Wall |
| Hendrickson Air Ride Systems with Integral Axes |
Hendrickson® ULTRAA-K Air Ride/Slider System |
| Hub Piloted System with Outboard Drums |
Outboard Cast Drums for 16-1/2" × 7" Brakes |
| Insulation Type |
Polyurethane Insulation Foam-In-Place |
| Length |
53' 0" Overall Length |
| Lower Clearance Lights |
Grote® Micronova® LED PC-Rated Light |
| Main Harness |
Utility Moisture Resistant Harness with Internal Ground and 7-Way Plug |
| Oil Seals |
National® 5 Star Oil Seal for 5-year Warranty |
| Overall Height |
13' 6" Overall Height on 46-1/2" 5th Height |
| Rear Case & Buckplate Material |
Stainless Steel Rear Door Case for Satin Finish Swing Doors |
| Rear Door Hinges |
4 Hinges per Door |
| Rear Door Lock Rods |
1 Lock Rod per Door |
| Rear Door Thickness |
3" Rear Doors |
| Rear Door Type |
Utility Design Barrier Door® |
| Rear Header Clearance Lights |
Grote Micronova LED Grommet-Mounted Rear Header Identification/Clearance Light |
| Rear Subframe Finish |
Black Scharpf |
| Roof Lining |
.065" Versitex-Utility VR2U Lining |
| Roof Thickness |
3" Roof |
| Rubber Dock Bumpers |
1 Pair Rubber Dock Bumpers |
| Side Panels |
.040" Aluminum Flat Side Panels |
| Side Posts |
1" J-Shape Extruded Aluminum Side Posts with 16" Maximum Center Line from Front to Rear of Support Legs with 24" Center Line Legs to Rear 2 Additional Posts each side over Front Subframe |
| Side Wall Lining |
.065" Versitex-Utility VR2U Lining |
| Side Wall Thickness |
2" Side Wall |
| Slider Pin Release Mechanism |
Hendrickson Quik-Draw® Air-Operated Slider Repositioning System |
| Slider Suspension Location |
70" Rear and 166" Forward Suspension Location for 96" of Slider Travel |
| Stop/Tail/Turn Light Configuration |
Grote 4" LED Stop/Tail/Turn Lights |
| Support Leg Finish |
Black Scharpf |
| Wearband |
10" High 3/16" Thick Heavy-Duty Extruded Aluminum Non-Tapered Integral Wearband with Floor |
